Key Features
The world‘s first camera skateboard featuring wheels that never flat-spot.
Developed and proven through testing, it delivers smooth performance while weighing only 7 kg, it is compatible with every industry-standard Dolly.
- COMPATIBLE WITH ALL KINDS OF INDUSTRY-STANDARD DOLLIES
- DOLLY WHEEL SIZE RANGE 178 - 275 MM / 7 - 10.82“
- WHEEL HARDNESS 60° SHORE A
- COMPATIBLE TRACK GAUGE 60 - 69CM / 23.62 - 27.16“
- WEIGHT OF EACH BOARD 7 KG / 5.4 LBS
- MAX. PAYLOAD OF EACH BOARD 300 KG / 660 LBS
MORE FEATURES on WWW.GARRYWHEELS.COM
Included Items
Each skateboard is equipped with two wheel assemblies.
These wheel assemblies feature split axles: one side rotates, while the other can slide laterally within a defined range.
Compared to other skateboard wheelsusing 32 wheels arranged in a 4×8 configuration, pushing a camera dolly through a curve can significantly increase rolling resistance.
This happens because the wheels are no longer aligned with the direction of the track and effectively tend to force themselves off the rails.
With this solution, however, every wheel and every axle precisely follows the curvature of the track. As a result, rolling resistance remains consistent throughout the move.
There is no need to compensate when transitioning from a straight section into a curve, and even at higher speeds, there is no need to worry about the dolly running off the track.
Compatible with
The GARRY WHEELS are compatible with all kinds of industry-standard dollies.
No matter what size your dolly wheel is, you can always make a three-point contact between the wheel and the GARRY WHEELS with the adjustable wheel clamps which you can adjust without
any tools.
If the adjustable clamp is used as intended, it should not get stuck. If so, and you are not able to tighten or loosen it, make sure the dolly is in place or use 5mm hex key.
WHEEL DIAMETER FOR PERFECT FIT:
178 - 275 mm / 7 - 10.82 inch